Sierra by 2.5 gallon / 320 oz. Concentrated Instant Floor Finish Emulsifier

Noble Chemical's Sierra concentrated Instant Floor Finish Emulsifier is a very aggressive floor finish emulsifier designed for easy removal of heavy build-ups and excessively burnished finishes. It may be used as a no-scrub stripper or with a conventional floor machine and pad depending on the concentration of the product and the condition of the floor. Instant floor finish emulsifier is suitable for use on vinyl tile, vinyl asbestos, asphalt tile, linoleum, rubber tile, concrete, flagstone, terrazzo, and ceramic tile.

Instructions:
1. Sweep or dust mop the floor to remove any debris.
2. Dilute from 1:3 to 1:14 (32 oz. to 9 oz./gal) with cold or warm water, depending on age and build-up of finish. Do not use hot water.
3. Apply liberally with a mop to an area small enough so as not to allow the product to dry. Be sure to completely cover floor to baseboards.
4. After 3 to 5 minutes, agitate the wet section with a mop or machine scrub. Pick up solution using a mop, wet vac or automatic scrubber.
5. Rinse thoroughly with clear water to remove residue as necessary.

Note: Asphalt tile and rubber flooring could be affected by stripping solutions in high concentrations with hot water. Always test floor before proceeding.

Resources and Downloads

- Ingredients 269.01 KB
- Easily removes heavy buildups and excessively burnished finishes
- Suitable for use with rotary floor machines
- Works on vinyl, linoleum, and ceramic
- Perfect for restaurant, bar, or institution
- Easy to use

Noble Chemical Brand

Noble Chemical brand supplies are a smart addition to any restaurant, hotel, or healthcare facility, and this handy cleaner will keep your floors looking good as new. Our selection of Noble Chemical products includes a variety of institutional and industrial supplies, like cleaning chemicals, insect control solutions, disinfectants, and other products, all of which are available at competitive prices. Plus, these chemicals come packaged in simple jugs and containers that are versatile enough for nearly any job in a business.

Step-By-Step Instructions

Before using the emulsifier, sweep or dust mop the floor to remove any debris. Dilute the concentrate from 1:3 to 1:14 (32 oz. to 9 oz./gal) with cold or warm water, depending on the age and build-up of the finish. Do not use hot water. Apply the solution liberally with a mop to a small area, being sure to completely cover floor to baseboards. After 3 to 5 minutes, agitate the wet section with a mop or machine scrub. Pick up the solution using a mop, wet vac, or automatic scrubber. Rinse the surface thoroughly with clear water to remove residue as necessary. Please note that asphalt tile and rubber flooring could be affected by stripping solutions in high concentrations with hot water. Always test the floor before proceeding.